Part of the wiring is visible on this photo. Reed contacts are used to detect the magnets in the cars above. These, as well as the LED's are connected to the arduino. A 5V and GND cable are running around the complete track so there's no need for individual cables to each sensor or LED.
Een deel van de bekabeling is zichtbaar op deze foto. Reed contacten worden gebruikt om de magneten in autootjes op de weg te detecteren. Zowel de sensoren als de LED's zijn verbonden met een arduino. Rond het circuit loopt een 5V en nulleider zodat niet elke sensor of LED een individuele kabel nodig heeft.